St. Louis Bearing, Inc. has been providing top quality bearings since 1946. We specialize in Babbitt Bearings, and bearings designed in bronze. We manufacture both standard and custom bearings, quantities anywhere from one to long-run OEM.
We do centrifugal casting from 2" to 36" in diameter and 2" to 72" in length, and static casting up to 8 feet in diameter. We can manufacture and repair almost any bearing you have, either by print, reverse engineering, sketch, etc. Also, we have a great deal of experience in repairing tilt and thrust pad type bearings.
With our multi-ton lifting capacity, we can machine bearings that weigh up to 5 tons. Each bearing receives an ultrasonic test and is accompanied by an inspection report upon delivery. Ultrasonic certification is available through an outside source when required. Ultrasonic tests show that the quality of our bond is consistently in excess of 90 percent, far above the 85 percent minimum MIL-SPEC requirement.
Company Name: St. Louis Bearing
Category: Primary Metal
Location: Wilmington, CA
Contact Person: Mike Machala
Phone: (310) 834-8506
Email: @
Website: www.stlouisbearing.com
Phone: | (310) 263-3060 |
---|---|
Contact CMTC: | Contact CMTC Here |
Address: |
California Manufacturing Technology Consulting® (CMTC) |