Products and Services
Steel rule dies are a great alternative to lasers, turret presses or class A hard tooling when extreme tolerances are not required. Steel rule dies are a fraction of the cost and take a fraction of the time to build of a hard tool. Steel rule dies can also be easily changed when revisions are required. Many of our customers have laser, turret presses, plasma and water jets, but use us to take the load off of these machines when the parts are required weekly or monthly. In many cases we can yield more parts per sheet and make them faster and cheaper. Several of our dies have made hundreds of parts weekly for over twenty years.
The following is a list of the many types of customers we have provided with parts for their assembly lines:
Electronics | Solar | Vending Machines |
Automotive | Aircraft | Displays |
Marine | Motorcycles | Furniture |
ATV | Advertising | Exercise Equipment |
Medical | Musical Instruments | Audio Equipment |
Appliances | Store Shelving and Fixtures | Lighting |
Manufacturing Processes
We can provide you with flat stamping to be completed at your facility or complete fabrication with forming, press in hardware, finish and silk screen.
We have punch presses from 40 to 125 tons and can stamp steel (NO STAINLESS) up to 12 gauge, and aluminum up to 1/8 inch thick depending on the size and details of the part. If you require a few hundred or several thousand parts we can deliver on your schedule be it daily, weekly, just in time, monthly or on a kan ban system.
If you think you have something we can help you with please contact us at [email protected] for a free quote. Development Manager: Mike Manley; Operations Manager: Roberto Lucero (Bilingual) [email protected]; Accounting Manager: Suzie Nelson Email: [email protected]
